# What's up with Glides AND and OR logic? **URL:** \ **Category:** Feature Requests\ **Created:** [August 13, 2025, 7:13pm UTC](https://community.glideapps.com/t/whats-up-with-glides-and-and-or-logic/83817 "2025-08-13T19:13:22Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Mark\_Smith1](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/mark_smith1/32/91017_2.png) [@Mark\_Smith1](https://community.glideapps.com/u/Mark_Smith1)\ **Post date:** [August 13, 2025, 7:13pm UTC](https://community.glideapps.com/t/whats-up-with-glides-and-and-or-logic/83817/1 "2025-08-13T19:13:22Z")
A true conversation with AI… and frankly this scares me. Maybe you can help with this. I’ve tried a million different ways to get it to filter by ``` • Time Stamp is within Today • And Status is New OR Status is Modified ``` And I can’t get it to do it. If you provide me with an explicit direction I will do that and report back what happens. Thanks Gotcha — Glide’s filter logic is a little quirky when you want an **OR** condition, so here’s the exact way to do it without fighting the UI. **1️⃣ Add helper columns in your Orders table** We’ll make two Boolean columns to simplify the filter. ``` 1\. **Col 1:** Is Today? (If–Then–Else column) • IF Time Stamp → is within → **Today** ``` → THEN true → ELSE false ``` 2\. **Col 2:** Is New or Modified? (If–Then–Else column) • IF Status is New ``` → THEN true ``` • ELSE IF Status is Modified ``` → THEN true ``` • ELSE false ``` ⸻ **2️⃣ Combine them in a third Boolean column** Name it Show in Kitchen? (If–Then–Else column): ``` • IF Is Today? is true AND Is New or Modified? is true ``` → THEN true → ELSE false ⸻ **3️⃣ Filter your Kitchen Display** In the Kitchen Display screen: ``` • Set the filter to **Show in Kitchen? is true**. ``` ⸻ ✅ That way, Glide only has to check **one** Boolean column, and you avoid the UI’s “can’t mix OR with AND” limitations. This is frankly worse that C, Fortran, Pascal, dBase or even BASIC which could all handle this simple logic problem adroitly without resort to creating columns to hold intermediate calculations. And besides, what ever happened to “No Code Required”? While Glide does some things really well it often fails on the most basic things. Mark ---
**Author:** ![Jeff\_Hager](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/jeff_hager/32/43_2.png) [@Jeff\_Hager](https://community.glideapps.com/u/Jeff_Hager)\ **Post date:** [August 13, 2025, 9:00pm UTC](https://community.glideapps.com/t/whats-up-with-glides-and-and-or-logic/83817/2 "2025-08-13T21:00:26Z")
Completely agree. All IF and Conditional logic in Glide is horribly designed. Can’t tell you how many times people have asked for help with simple AND/OR logic. I have this longstanding Feature Request out there already. > [@Better and more consistent IF THEN logic](https://community.glideapps.com/t/better-and-more-consistent-if-then-logic/24317): > > I’ve spent the past few days trying to work out some IF/THEN logic for a side project. The problem is that this is something I could have worked out in a matter of a few minutes with actual code. I’m running into several limitations with the current IF/THEN logic we currently have in Glide. First of all there are inconsistencies between what’s possible with an IF/THEN column, and what’s possible with If/Then logic in visibility conditions or actions. Most importantly, an IF/THEN column only… Usually the best suggestion is to twist around your logic a bit and kind of reverse it to get an IF column to handle AND mixed with OR. I don’t didn’t like it because it’s hard to follow and maintain it afterwards, but it’s the only solution we’ve had over the years. Unfortunately it doesn’t work for all use case. For your case, if there was such a thing as ‘Not Within’ then I could get it all into one IF column. Otherwise, short of something hacky like “is included in ‘NewModified’”, I think the best alternative would be to use a javascript column for more complex IF logic.