# Tabs and sheets **URL:** \ **Category:** Ask for Help\ **Created:** [May 23, 2020, 10:08am UTC](https://community.glideapps.com/t/tabs-and-sheets/9638 "2020-05-23T10:08:40Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Swellart](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/swellart/32/6118_2.png) [@Swellart](https://community.glideapps.com/u/Swellart)\ **Post date:** [May 23, 2020, 10:08am UTC](https://community.glideapps.com/t/tabs-and-sheets/9638/1 "2020-05-23T10:08:40Z")
I have two different tabs based on the same sheet. Each tab has it’s own components. One of the tabs is “home” (the first screen) and the second one is profile. Until now Glide always opened Home screen when the new user logged in but today the other user’s profile was opened for the new user as a first screen. Question: is it just “bad luck” or two different tabs should not be based on the same sheet? PS. all components have a conditional view based on logged in user ---
**Author:** ![eltintero](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/eltintero/32/76520_2.png) [@eltintero](https://community.glideapps.com/u/eltintero)\ **Post date:** [May 24, 2020, 5:08am UTC](https://community.glideapps.com/t/tabs-and-sheets/9638/2 "2020-05-24T05:08:21Z")
Are you sure you have conditional visibility for the profile tab? > [@raising\_hand\_woman User Profile columns in conditions and columns](https://community.glideapps.com/t/user-profile-columns-in-conditions-and-columns/8093): > > If you’re using [User Profiles](https://docs.glideapps.com/all/reference/privacy-and-per-user-data/user-profiles), you can now use columns from the currently signed-in user in visibility conditions as well as in computed columns in the Data Editor. Here’s an example where we enable the Edit screen only if the signed-in user is an “editor”: You can read more about it [in our docs](https://docs.glideapps.com/all/reference/privacy-and-per-user-data/user-profiles). As always, we love to hear your feedback! ---
**Author:** ![Swellart](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/swellart/32/6118_2.png) [@Swellart](https://community.glideapps.com/u/Swellart)\ **Post date:** [May 24, 2020, 9:24am UTC](https://community.glideapps.com/t/tabs-and-sheets/9638/3 "2020-05-24T09:24:52Z")
Yes, the condition is: show when email (in “profile” sheet) is logged in user. It happened just once and now it works well again. But what is not clear to me now after this case: if I have two or more different tabs based on the same Gsheet, each of them has some unique set of components - when I tap on the tab - is it possible that components of another tab for this sheet will be opened? Do we need to set some additional conditions to separate these tabs which is not easy since we don’t have conditional visibility for tabs? Before this case happened I was sure that - No - only components that belong to this tab will be opened. What is especially strange for me: two tabs - one of them is “Home” - the first screen after user logged in and the second one - profile which can be open only from the menu. How it can be that the profile tab opened first instead of the Home screen? ---
**Author:** ![eltintero](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/eltintero/32/76520_2.png) [@eltintero](https://community.glideapps.com/u/eltintero)\ **Post date:** [May 25, 2020, 2:42am UTC](https://community.glideapps.com/t/tabs-and-sheets/9638/4 "2020-05-25T02:42:57Z")
Each component should have its own visibility settings, it doesn’t matter if 2 tabs are showing info from the same sheet. > [@Swellart](#): > > What is especially strange for me: two tabs - one of them is “Home” - the first screen after user logged in and the second one - profile which can be open only from the menu. How it can be that the profile tab opened first instead of the Home screen? This is quite strange. Do you have a video of this happening that you can share? ---
**Author:** ![Swellart](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/swellart/32/6118_2.png) [@Swellart](https://community.glideapps.com/u/Swellart)\ **Post date:** [May 25, 2020, 10:32am UTC](https://community.glideapps.com/t/tabs-and-sheets/9638/5 "2020-05-25T10:32:30Z")
Unfortunately I don’t have a video of this happening. I was guiding the client from another town by phone how to start using our app and after logging in she told me - OK, I see now photo and other information… - It was photo and info from my profile… It was step by step procedure, she commented every step… so no chance that she while browsing the app eventually opened my profile - it was her first screen! After this happening I started to think - if it is good practice to create more than one tab per sheet? Regarding visibility settings - I am quite aware of this technique and use it all the time.