# Nesting Containers and Tab Containers

**URL:** <https://community.glideapps.com/t/nesting-containers-and-tab-containers/83834>\
**Category:** Feature Requests\
**Created:** [August 14, 2025, 2:47pm UTC](https://community.glideapps.com/t/nesting-containers-and-tab-containers/83834 "2025-08-14T14:47:08Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Jeff\_Hager](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/jeff_hager/32/43_2.png) [@Jeff\_Hager](https://community.glideapps.com/u/Jeff_Hager)\
**Post date:** [August 14, 2025, 3:04pm UTC](https://community.glideapps.com/t/nesting-containers-and-tab-containers/83834/2 "2025-08-14T15:04:10Z")

</div>

If you are looking for an alternative you can use now, you can still use the Tabs component inside a container. Only difference is that you need to give it a user specific column to store the selected tab. I don’t use the Tabs Container component. I only use the Tabs component, which give a bit more flexibility, but requires you to set up visibility conditions for any components or containers based on the selected tab.

Below, the first set of tabs is always visible, but the second set is only visible when Tests is select. Basically the Tabs component is just another type of choice component.

 ![1000005685](https://us1.discourse-cdn.com/flex002/uploads/glideapps/original/3X/7/8/7857098e96b5ba20d307dd402a92414051c43d22.png)

---

_[View the full topic](https://community.glideapps.com/t/nesting-containers-and-tab-containers/83834)._