# Graph not showing **URL:** \ **Category:** Ask for Help\ **Created:** [September 15, 2021, 6:36am UTC](https://community.glideapps.com/t/graph-not-showing/31811 "2021-09-15T06:36:03Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![ThinhDinh](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/thinhdinh/32/49_2.png) [@ThinhDinh](https://community.glideapps.com/u/ThinhDinh)\ **Post date:** [September 15, 2021, 7:58am UTC](https://community.glideapps.com/t/graph-not-showing/31811/7 "2021-09-15T07:58:55Z")
I would plug that template into Quickchart’s sandbox, replace the values manually there, then check the resulting graph to make sure it is completely true. Your way of doing it here is not what I usually do. I usually have just the configurations part in the template, the URL construction part should be done in a construct URL column. > [@heart\_eyes Quickchart.io: the Cloudinary of Charts —on the fly charts!](https://community.glideapps.com/t/quickchart-io-the-cloudinary-of-charts-on-the-fly-charts/15946/125): > > So here is the one I did using the Construct URL column… Started off with a URL that looked like: https://quickchart.io/chart?bkg=white&c={.........} There are two query parameters in that URL: bkg=white c={ JSON structure } So I took the whole JSON structure, and put that in a template column: Then defined the Construct URL column as follows: The first query parameter was simple, so I “hard-coded” that, … --- _[View the full topic](https://community.glideapps.com/t/graph-not-showing/31811)._