# Glide and make.com webhooks

**URL:** <https://community.glideapps.com/t/glide-and-make-com-webhooks/85198>\
**Category:** Ask for Help\
**Created:** [November 1, 2025, 8:02am UTC](https://community.glideapps.com/t/glide-and-make-com-webhooks/85198 "2025-11-01T08:02:40Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Andre75](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/andre75/32/83970_2.png) [@Andre75](https://community.glideapps.com/u/Andre75)\
**Post date:** [November 1, 2025, 8:02am UTC](https://community.glideapps.com/t/glide-and-make-com-webhooks/85198/1 "2025-11-01T08:02:40Z")

</div>

I’m successful sending a webhook JSON payload to [make.com](http://make.com) scenario. However, the make scenario will only work when I select Run Once and I get about 20 seconds to trigger the webhook and send from Glide.

I know this is more of a [make.com](http://make.com) issue but I know a lot of you will use this type of integration.

I just need my [make.com](http://make.com) scenario to run any time it receives the JSON from Glide.

Thank you.

Andre

---

<div class="post-metadata">

**Author:** ![ThinhDinh](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/thinhdinh/32/49_2.png) [@ThinhDinh](https://community.glideapps.com/u/ThinhDinh)\
**Post date:** [November 1, 2025, 12:22pm UTC](https://community.glideapps.com/t/glide-and-make-com-webhooks/85198/2 "2025-11-01T12:22:54Z")

</div>

So nothing happens when you turn the Make scenario on and trigger normally in Glide?

---

<div class="post-metadata">

**Author:** ![Andre75](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/andre75/32/83970_2.png) [@Andre75](https://community.glideapps.com/u/Andre75)\
**Post date:** [November 1, 2025, 1:05pm UTC](https://community.glideapps.com/t/glide-and-make-com-webhooks/85198/3 "2025-11-01T13:05:27Z")

</div>

That’s right. I need to use the Run Once button in order to activate the scenario. I want the webhook module to activate when it receives data from Glide.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/glideapps/original/3X/e/a/ea0e282084c3203c84fb408729a36b916b33aeed.png)

---

<div class="post-metadata">

**Author:** ![ThinhDinh](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/thinhdinh/32/49_2.png) [@ThinhDinh](https://community.glideapps.com/u/ThinhDinh)\
**Post date:** [November 2, 2025, 1:12am UTC](https://community.glideapps.com/t/glide-and-make-com-webhooks/85198/4 "2025-11-02T01:12:49Z")

</div>

Does it show any log on the Glide side when you trigger the action in Glide and don’t use Run Once?

---

<div class="post-metadata">

**Author:** ![Darren\_Murphy](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/darren_murphy/32/47326_2.png) [@Darren\_Murphy](https://community.glideapps.com/u/Darren_Murphy)\
**Post date:** [November 2, 2025, 4:25am UTC](https://community.glideapps.com/t/glide-and-make-com-webhooks/85198/5 "2025-11-02T04:25:53Z")

</div>

Have you turned the scenario on?

 ![CleanShot 2025-11-02 at 12.25.01@2x](https://us1.discourse-cdn.com/flex002/uploads/glideapps/original/3X/d/2/d29c02b941378f033e556e010ad40bd5f38f0ad4.png)