# Erratic behavior and spinning wheel when applying row owner **URL:** \ **Category:** Report a Bug\ **Created:** [February 25, 2021, 11:28pm UTC](https://community.glideapps.com/t/erratic-behavior-and-spinning-wheel-when-applying-row-owner/23452 "2021-02-25T23:28:36Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![Rasha](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/rasha/32/4585_2.png) [@Rasha](https://community.glideapps.com/u/Rasha)\ **Post date:** [February 25, 2021, 11:28pm UTC](https://community.glideapps.com/t/erratic-behavior-and-spinning-wheel-when-applying-row-owner/23452/1 "2021-02-25T23:28:36Z")
**The TAB in question:** - Source = Sheet A - Has 3 components pulling values from sheet A, and - An inline list that’s a relation to a sheet B (we’ll call it rel\_X) **Filtering:** - Tab-level filter: If an email column A = signed-in user - Inline list filter: If an email column B (different one) = signed-in user - Base-level filter on all components **other than** inline list = show when rel\_X is not empty. * * * While testing various security scenarios, **Row Owner** was enabled on email columns in Sheet A, B and others. In GE, Row Ownership appears to be working as intended and the correct data is accessible to the “previewing as” user. In the builder - a different story. At times rel\_X will display **but nothing else will.** Other times, only a button or lone text component will make an appearance. **Most of the time** , it’s the dreadful spinning wheel, which only goes away on **navigating away from the tab and returning.** This behavior is not as frequent in the app on a mobile device (celluar+wifi, or strictly wifi) but it does occur. I’m all but certain I don’t have anything set up that would cause conflict. Perhaps this is a case of asking GE to do too much processing? Putting this out there in case others have had similar experiences and will formally report to Support next week.