# Conditions based on wifi network

**URL:** <https://community.glideapps.com/t/conditions-based-on-wifi-network/86838>\
**Category:** Ask for Help\
**Created:** [April 9, 2026, 7:49am UTC](https://community.glideapps.com/t/conditions-based-on-wifi-network/86838 "2026-04-09T07:49:35Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cherub](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/cherub/32/94369_2.png) [@Cherub](https://community.glideapps.com/u/Cherub)\
**Post date:** [April 9, 2026, 7:49am UTC](https://community.glideapps.com/t/conditions-based-on-wifi-network/86838/1 "2026-04-09T07:49:35Z")

</div>

It is possibel to set a condition based on wifi network connection?  
The device info intergation allows to get different info of the device, I was hoping it woud be possible to set a condition based on the wifi device is using. This would be Inmportant for the organisation for several reasons.

---

<div class="post-metadata">

**Author:** ![Darren\_Murphy](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/darren_murphy/32/47326_2.png) [@Darren\_Murphy](https://community.glideapps.com/u/Darren_Murphy)\
**Post date:** [April 9, 2026, 9:04am UTC](https://community.glideapps.com/t/conditions-based-on-wifi-network/86838/2 "2026-04-09T09:04:31Z")

</div>

No, I don’t believe that is possible.

---

<div class="post-metadata">

**Author:** ![herman35](https://sea2.discourse-cdn.com/flex002/user_avatar/community.glideapps.com/herman35/32/95598_2.png) [@herman35](https://community.glideapps.com/u/herman35)\
**Post date:** [July 26, 2026, 6:25pm UTC](https://community.glideapps.com/t/conditions-based-on-wifi-network/86838/3 "2026-07-26T18:25:24Z")

</div>

I do not think Glide has a builtin condition that can detect which wifi network a user is connected to. As far as I know the device Info integration doesnt expose the wifi SSID for conditions. If your goal is to restrict certain actions to people on your local network, a workaround might be to check their IP address through an external service or use another identifier that fits your setup.
