# All Image columns not showing in system generated Image relation
**URL:** https://community.glideapps.com/t/all-image-columns-not-showing-in-system-generated-image-relation/5064
**Category:** Report a Bug
**Created:** [March 1, 2020, 3:55pm UTC](https://community.glideapps.com/t/all-image-columns-not-showing-in-system-generated-image-relation/5064 "2020-03-01T15:55:42Z")
**Posts on this page:** 11
**Page:** 1
### Author:  [@George\_B](https://community.glideapps.com/u/George_B)
#### Post date: [March 1, 2020, 3:55pm UTC](https://community.glideapps.com/t/all-image-columns-not-showing-in-system-generated-image-relation/5064/1 "2020-03-01T15:55:42Z")
I added 7 additional Image columns (Gallery 4; Gallery 5; etc.) to an existing sheet that already had 3 columns labeled Gallery 1; Gallery 2; Gallery 3. These new columns are in column positions that are to the right of the existing 3 and the system generated virtual Gallery column. These new columns do not show in this virtual column so the image carousel does not show them.
---
### Author:  [@Jeff\_Hager](https://community.glideapps.com/u/Jeff_Hager)
#### Post date: [March 1, 2020, 3:59pm UTC](https://community.glideapps.com/t/all-image-columns-not-showing-in-system-generated-image-relation/5064/2 "2020-03-01T15:59:41Z")
Wouldn’t this require a reload in the builder since it’s a structural change to the sheet? I’ve kind of wondered how arrays would work if columns are added on the fly.
---
### Author:  [@George\_B](https://community.glideapps.com/u/George_B)
#### Post date: [March 1, 2020, 4:09pm UTC](https://community.glideapps.com/t/all-image-columns-not-showing-in-system-generated-image-relation/5064/3 "2020-03-01T16:09:03Z")
I have refreshed the sheet obviously, but I think that is the issue, a refresh in the Glide builder is what needs to be done which is something I can’t do from my end.
---
### Author:  [@Mark](https://community.glideapps.com/u/Mark)
#### Post date: [March 1, 2020, 4:17pm UTC](https://community.glideapps.com/t/all-image-columns-not-showing-in-system-generated-image-relation/5064/5 "2020-03-01T16:17:33Z")
What I see from looking at the sheet (thanks for sharing, @George_B) is that the columns are not consecutive. There’s a “Featured order” column between “Gallery 3” and “Gallery 4”.
---
### Author:  [@George\_B](https://community.glideapps.com/u/George_B)
#### Post date: [March 1, 2020, 4:19pm UTC](https://community.glideapps.com/t/all-image-columns-not-showing-in-system-generated-image-relation/5064/6 "2020-03-01T16:19:26Z")
Agreed. I must have forgot that that is a requirement. If that is the case then I have some work to do as the order is dependent in some of the other Query’s
---
### Author:  [@George\_B](https://community.glideapps.com/u/George_B)
#### Post date: [March 1, 2020, 4:25pm UTC](https://community.glideapps.com/t/all-image-columns-not-showing-in-system-generated-image-relation/5064/7 "2020-03-01T16:25:35Z")
I was able to resolve the issue by changing the column order of the images and making them all next to each other. Thanks @Mark for the quick look at my mistake.
---
### Author:  [@Jeff\_Hager](https://community.glideapps.com/u/Jeff_Hager)
#### Post date: [March 1, 2020, 4:35pm UTC](https://community.glideapps.com/t/all-image-columns-not-showing-in-system-generated-image-relation/5064/8 "2020-03-01T16:35:39Z")
Just curious though, does glide pick up an additional array column without a sheet reload in the builder? I can understand a new unrelated column, but an arrest common is a little different. Maybe I’ll have to try this out this afternoon.
---
### Author:  [@Mark](https://community.glideapps.com/u/Mark)
#### Post date: [March 1, 2020, 4:37pm UTC](https://community.glideapps.com/t/all-image-columns-not-showing-in-system-generated-image-relation/5064/9 "2020-03-01T16:37:16Z")
It should pick that up, but I haven’t tested it.
---
### Author:  [@George\_B](https://community.glideapps.com/u/George_B)
#### Post date: [March 1, 2020, 4:44pm UTC](https://community.glideapps.com/t/all-image-columns-not-showing-in-system-generated-image-relation/5064/10 "2020-03-01T16:44:31Z")
?? arrest common ?? is this a typo and you mean array column
---
### Author:  [@Jeff\_Hager](https://community.glideapps.com/u/Jeff_Hager)
#### Post date: [March 1, 2020, 5:26pm UTC](https://community.glideapps.com/t/all-image-columns-not-showing-in-system-generated-image-relation/5064/11 "2020-03-01T17:26:42Z")
I meant array. I can’t type for crap on my phone…or proofread for that matter.
---
### Author:  [@Jeff\_Hager](https://community.glideapps.com/u/Jeff_Hager)
#### Post date: [March 1, 2020, 9:10pm UTC](https://community.glideapps.com/t/all-image-columns-not-showing-in-system-generated-image-relation/5064/12 "2020-03-01T21:10:05Z")
Just tested it in staging. It seemed to pick up additional columns added to an existing array without having to do anything in the builder. It might take a little while or an app reload, but it does recognize the new column. That’s good to know.